Why Install Two Rubber Bands On The Tattoo Machine?
Aug 08, 2022
Many tattoo beginners certainly don't understand why they need to put one or two rubber bands on the tattoo machine. Today I'll tell you why they need to install two rubber bands on the tattoo machine and what role it plays.
Carefully observe the welding characteristics of the needle tip, and refer to the needle on the side of the needle bar in the figure. At this time, you should understand that the needle tip should be close to the lower wall of the needle mouth when it is installed in the needle mouth, so as to prevent the needle from shaking during the tattoo process, and also absorb a large amount of tattoo color between the needle and the side wall, which is convenient for work. After the correct position of the needle is determined, at this time, we can use 1 or 2 rubber bands with moderate elasticity to hold the needle, so that the needle is as close to the lower wall of the needle mouth as possible, so as to prevent the shaking of the tattoo needle during work.
A tattoo practitioner needs to understand various tattoo technologies. There are many machines and equipment in tattooing, and different equipment plays different roles in tattooing. Do you know the role of thread hooking in tattooing machines?
The hook wire is used to conduct electricity between the machine and the power supply. At one end, two terminals are connected to the regulated power supply, and at the other end, two hooks connected by springs are connected to the tattoo machine. One hook hooks the small hole on the spring base of the frame, and the hook at the other end passes through the rear terminal. These two hooks are the positive and negative poles of DC respectively.
