Check The Tattoo Machine Carefully After Installation

Now the machines are basically assembled together. The needle mouth needs final correction, that is, to change the length of the needle tip exposed outside the tip end of the needle mouth. Press the armature down to make it lean on the coil, hold it and adjust the needle mouth up and down so that the needle tip can protrude to a proper length.

Release the armature so that it can spring up and rest against the jacking wire. At this time, the needle cannot expose the tip of the needle mouth at all. Make sure that the opening of the needle nozzle is in front, and tighten the screw. Now that the machine has been assembled, you can start the real tattoo. Check whether the machine is pulling the tattoo needle and whether the needle moves up and down correctly.

Only when the needle moves up and down strictly can a good tattoo be made. Sometimes the needle will wobble or move to one side. Start the machine to check whether there is such a situation. If so, the problem should be solved as soon as possible, so as to ensure the stable and smooth lines when tattooing.

Sometimes it is effective to reduce the voltage slightly. At the same time, check whether the needle tip is damaged. However, the needle adds one or more rubber bands from different directions along the top of the needle bar until a certain tension is reached, which can prevent the needle from shaking. Don't bend the needle bar. Use a high-power magnifying glass to check when the machine is running to ensure that the needle moves up and down. Avoid any jitter. Each stitch should be clear and not blurred. When the eye magnifying glass is used to detect the correct movement of the needle, it is also the time to check whether the needle tip is damaged (look at the part on the needle). This should be a habitual action, because the whole inspection process should be carried out before the cutting and fogging of the tattoo. If you use a machine tattoo with a needle shaking all the time, the needle will cut the skin seriously, even tear the skin, and make it difficult for the dye to penetrate the skin. When the skin starts to heal, it is easy to scab, resulting in color damage. Because of this, although the whole operation of adjusting the tattoo needle only takes a few minutes, it will save a lot of time and avoid scabs when the tattoo is injected with color and starts to recover.