Tattoo power supply is a closed independent component installed in the main cabinet
Aug 11, 2022
The computer tattoo power supply is a closed independent component installed in the main cabinet. Its function is to change the AC power into 5V, - 5V, + 12V, - 12V, + 3.3V and other stable DC power through a switch tattoo power transformer, so as to supply the system version, floppy disk, hard disk drive, various adapter expansion cards and other system components in the main cabinet. Generally speaking, one tattoo power supply is broken, and the other backup tattoo power supply replaces its power supply. The availability of hardware can be enhanced by providing battery backup for nodes and disks. HP supported uninterruptible tattoo power supply (UPS), such as HP powertrust, can prevent instant power loss.
The connection between the disk and the power supply circuit shall be such that the image copy is connected to different tattoo power supplies. The root disk and its corresponding node shall be powered by the same tattoo power circuit. In particular, the cluster lock disk (used as an arbiter when reorganizing the cluster) should have redundant tattoo power, or it can be powered by tattoo power outside the nodes in the cluster. Your HP representative can provide detailed information about the tattoo power supply, disk and LAN hardware layout of the cluster.
At present, many disk arrays and other rack mounted systems contain multiple tattoo power inputs. They should be deployed so that different tattoo power inputs on the equipment are connected to independent circuit equipment with two or three tattoo power inputs. In general, as long as there is no more than one circuit that fails, the system can continue to operate normally. Therefore, if all the hardware in the cluster has 2 or 3 tattoo power inputs, at least three independent circuits are required to ensure that there is no single point of failure in the circuit design of the cluster.






